The basic structure is inherited
Let’s look at the PSP 2000’s internal structure today. Remove the PSP 2000 screws, the inside are most exposed, there is a hidden screw under the warning sticker affixed to the battery case. To seal the warning, “please do not remove this label definitely, otherwise you must responsible for repair.” is witten.
PSP 2000 back
Warning stickers are affixed to open the battery case
Warning stickers removed, "VOID" and the character pops
The decomposition procedure, remove the front panel, the next step is taking off the LCD panel.
Open the front panel keys and buttons these visible parts.Button-related structure is simple and feels like the first is not too hard. The parts count is low, it is hard to damage structures.
Just taken off from the front panel. Button on the left and right parts of one kind of sensor is a single board
The front panel is taken off from the protection of the LCD panel attached
ARROW structure 01
ARROW structure 02
Structure of the analog stick 01
Structure of the analog stick 02
Structure Buttons 01
Structure Buttons 02
LCD under "START" button and structure
LCD under "START" button and structure 02
LCD under "START" button and structure 03
Each component miniaturization progresses
Narrow-framed LCD panels and light. "CUDB S1A3" are engraved
LCD panels and screws are not fixed
Labels on the LCD panel
Shield covering the main board
Taken off the LCD status
Structure of the R button
L button structure
Has a similar structure in the left
R button
The sensor is directly on flexible substrates Dzuke are connected to the main board
Structure around the power switch
Lower right side panel portion
As part of the lower left panel
Wireless LAN antenna is pasted inside the body seals
Not sure but that it seems like the LCD panel is thinner. There are narrower portion of the frame of the panel. PSP is the first in the LCD panel which is fixed to the metal frame, PSP 2000 has been omitted in it.
However, UMD’s most advanced compact. Become a minimum-metal chassis that is slightly thinner.
UMD removed the lid of the state
It is a sign of the date of manufacture on the back of the lid
UMD drive
Rear drive
Both the main board was implemented. Now we can afford or wireless LAN are integrated into the main board and sub boards.
Remove the main board
cover sticking to the main board
Picture of the main board (surface)
Picture of the main board (back)
One major chip up
Up of two major chip
Up of three major chip
PSP is the first time for outside of the box design, the parts have the impression that is forcibly packed, and organized this much, it hurts impression.
List of main parts
However, the nunber of cable still flexbile, and assembled from both sides, making an effort with so many manufacturing, compared to Nintendo DS Lite, it apppears to be a high production cost.
Game console is so light and durable
PSP 2000 has received a very good improssion for me. Anyway, but it’s so hard to break in a good light and simple. Compared to the original PSP, this console is more high quality. The original PSP is expected to achieve the functionality of even slightly, this also created the impression that the high cost.
August 19th, 2010 at 6:51 pm
nice.. i loved it.. i just want to know what screw drivers did you use to open it. i got a little problem with the part where you stick the charger in. anony_04(Quote) (Reply)
August 23rd, 2010 at 7:40 pm
The tools we use are1x 0 or 00 Philips Screwdriver and 1x small flat-head screwdriver. littleq03(Quote) (Reply)