Do you know the structure of Nokia 6300 mobile phone? Do you want to clean up the inside part of Nokia 6300? If you say “YES”, this article will attract you.
In fact, there is a small brush on the picture, which is usually used on razor. You can clean the dust of the gap. And the cloth is dedicated to clear laptop, which is soft and good to wipe the Nokia 6300 mobile phone.
When you have prepared the tools well, you can take actions with your phone. First of all, you should open the back shell of the battery, and then take the battery off.
Then you can try to remove the screws holding the phone, and remove the back shell. In this step, what you need is patience in case that the buckles will be broken. And when you try to remove the screws, you had better remove all the screws at the same time instead of one by one.
Pry up the shell of Nokia 6300 with your fingers, and you can start from the bottom of the Nokia 6300.
Nokia 6300 is dismantled in two parts. Now you can clean your 6300.
There accessories of Nokia 6300’s motherboard is less, but there is a metal shield to ensure the stability and call quality.
The tiny camera of the Nokia 6300
The 2-inch screen of Nokia 6300 is people who like most
The cover of the Nokia 6300 is made of stainless steel and plastic, which is harder than plastic.
Only single-layer board of Nokia 6300
This is the whole components of Nokia 6300.
